Paint correction has three stages: cutting, polishing,, finishing. The products you should use: compound, polisher, polishing pad.
I understand roughly Polish products:
1. The types of polishers： DA polishers (orbital polishers), Ro polishers (rotary polishers), and GA polishers.
2, Polishing pad: microfiber pad, wool buffing pad, foam buffering pad.
3, chemical: compound, polishing, finishing.
Here should be special mention that our foam buffering pad for DA polisher and RO polisher, you do not need to change your polishing pad during changing polishers.
Car paint conditions， what type of polishers, buff pad, compound polish, pls look at below one by one:
First car paint condition: There are a lot of oxides, flying paint, and other attachments on the surface of the paint.
The Solution
1, Da polisher/SGGF037
2,Buffer pad:bigger cut(blue color), small cut(yellow color)
3, compound: 1500/3000
Second car paint condition: deep scratch.
The Solution
1, Da polisher/SGGF037， rotary polisher/SGGF028
2,Buffer pad: middle cut(wine color), small cut(red color)
3, compound: 1500S/3000S
Third car paint condition: middle scratch.
The Solution
1, Rotary polisher/SGGF028
2,Buffer pad: big cut(green color), small cut(yellow color)
3, compound: 1500/3000S
Fourth car paint condition: light scratch.
The Solution
1, Da polisher/SGGF037
2,Buffer pad: big cut(green color), small cut(red color)
3, compound: 1500/3000S
Fourth car paint condition: fine scratch.
The Solution
1, Da polisher/SGGF037
2, Buffer pad: small cut(yellow color)
3, compound: 3000
